CHQLQ - FLEXITALLIC TBA 410
- MSDS: CHQLQ
- Manufacturer: TBA INDUSTRIAL PRODUCTS LTD SEALING MATERIAL DIV
- Product Name: FLEXITALLIC TBA 410
- National Stock Number: 5330-01-084-4769
Product Identification
Product ID:FLEXITALLIC TBA 410
MSDS Date:06/20/1994
FSC:5330
NIIN:01-084-4769
MSDS Number: CHQLQ
Responsible Party
UK
Emergency Phone: 800-527-1935
Info Phone: 800-527-1935
Cage: U1309
Contractor
Telephone: 800-527-1935
Cage: U1309
Ingredients
ASBESTOS, CHRYSOTILE
CAS: 12001-29-5
RTECS: CI6478500
Fraction By Weight: < 75%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 2 FIBERS/CC,A1; 9596
RUBBER BINDER (SYNTHETIC RUBBER)
Fraction By Weight: < 15%
OSHA PEL NOT ESTABLISHED.
ACGIH TLV: NOT ESTABLISHED.
BARIUM SULFATE
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: < 15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9596
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE- NONE UNDER NORMAL CONDITIONS OF
USE. HOWEVER, GRINDING, SANDING OR MACHINING MAY PRODUCE NUISANCE
PARTICULATES THAT CAN CAUSE IRRITATION OF EYES, SKIN AND
RESPIRATORY PASSAGES. CHRONIC- LONG TE RM EXPOSURE TO ASBESTOS CAN
CAUSE IRREVERSIBLE ASBESTOSIS, LUNG DISEASE, LUNG CANCER.
Explanation of Carcinogenicity:CONTAINS A [1332-21-4] WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:NONE UNDER NORMAL CONDITIONS OF USE. HOWEVER,
GRINDING, SANDING OR MACHINING MAY PRODUCE NUISANCE PARTICULATES
THAT CAN CAUSE IRRITATION OF EYES, SKIN AND RESPIRATORY PASSAGES.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS SUCH AS DERMATITIS, RESPIRATORY PROBLEMS, LUNG DISEASE OR
ANY CONDITION THAT MAY BE AGGRAVATED BY NUISANCE DUST OR FIBERS.
First Aid
First Aid:SEEK MEDICAL ATTENTION IF SYMPTOMS DEVELOP. IN CASE OF EYE
IRRITATION GENTLY RINSE WITH WATER FOR 15 MINUTES WHILE KEEPING
EYELIDS OPEN. SKIN: WASH FREQUENTLY WITH SOAP AND WATER.
INHALATION: REMOVE T O FRESH AIR. INGESTION: UNLIKELY.
Fire Fighting
Flash Point:NON FLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:CARBON DIOXIDE, CHEMICAL OR FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR. COOL TANKS AND
CONTAINERS EXPOSED TO FIRE WITH WATER.
Unusual Fire/Explosion Hazard:TOXIC DECOMPOSITION FUMES MAY BE EVOLVED
IN A FIRE.
Accidental Release
Spill Release Procedures:IF A RELEASE OF DUST OCCURS DURING MACHINING,
ABRADING OR RIVETING, REMOVE DUST BY VACUUMING OR WET MOPPING.
VACUUMS USED FOR THIS PURPOSE SHOULD BE EQUIPPED WITH HEPA FILTERS.
DO NOT USE COMPRESSED A IR TO BLOW DUST FROM THE WORKPLACE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORAGE- AVOID CREATING DUST BY
SANDING OR GRINDING THE PRODUCT.
Other Precautions:SHIPPING AND STORAGE MAY RESULT IN ACCUMULATION OF
DUST IN SHIPPING CONTAINERS. IF THIS OCCURS, DISPOSE OF THE
CONTAINER IN AN AIRTIGHT POLYETHYLENE BAG. REMOVE DUST BY VACUUMING
OR WET MOPPING. DO NO T USE COMPRESSED AIR.
Exposure Controls
Respiratory Protection:USE NIOSH-APPROVED RESPIRATOR IF EXPOSURE TO
DUST OR FUMES IN CONCENTRATIONS EXCEEDING PEL'S OR TLV'S IS
POSSIBLE. SEE 29 CFR 1910.134 FOR RESPIRATORY PROTECTION STANDARDS.
Ventilation:ANY OPERATIONS WHICH MAY PRODUCE DUST, INCLUDING MACHINING,
GRINDING, RIVETING OR ABRADING SHOULD BE ADEQUATELY EXHAUSTD
Protective Gloves:LEATHER, COTTON OR RUBBER AS NEEDED
Eye Protection:DUST-RESISTANT SAFETY GOGGLES
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER, WORK
CLOTHING AND APRON AS REQUIRED. DO NOT WEAR CONTACT LENSES.
Work Hygienic Practices:DON'T TAKE PROTECTIVE GEAR/CLOTHING HOME IF
EXPOSED TO DUST. DON'T SHAKE. DON'T EAT IN AREA WHERE ASBESTOS/DUST
PRESENT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:T6
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.5 -2.0
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK SHEET MATERIAL - HYDROCARBON ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID ABRADING THE MATERIAL UNLESS DUST
EXTRACTION IS AVAILABLE OR RESPIRATORY PROTECTION IS WORN.
Hazardous Decomposition Products:DENSE SMOKE, OXIDES OF CARBON AND LOW
MOLECULAR WEIGHT ORGANIC COMPOUNDS.
Disposal
Waste Disposal Methods:WASTE SHOULD BE CONTAINED IN IMPERMEABLE BAGS,
LABELED AND DISPOSED IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.